WerkMaster BushHammer Tooling Removes High Spots in Concrete

No matter what CSP profile you are looking for, WerkMaster makes a range of tooling for your specific application. Use our Bush Hammer tooling to create a CSP 5 and up our our 16 grit metal bond toolsto create a CSP 3 bond for your garage floor coatings!

What Are CSP Ratings

For proper bonding of overlays and coatings, it is important that a concrete surface have the correct Concrete Surface Profile or CSP. A CSP rating is a standardized rating that allows you to visually determine the concrete surface roughness.
The most important step in creating a quality floor is the preparation. And for the proper bonding of any coating or overlay, you need to properly prepare the floor with the proper concrete surface profile. But what is a concrete surface profile? A concrete surface profile, known as a CSP, is a standardized measure for the ‘roughness’ of a surface that is defined by the International Concrete Repair Institute (ICRI). A very rough surface will have a high CSP number, such as CSP 9. A very smooth surface with almost no preparation at all will be a CSP 1.

CSP 2

This rating can be achieved with our tooling that carries a 30/40 Grit rating.
For coating applications from 2 to 3 mil thickness, the surface profile should be a CSP 2.

CSP 3

This rating can be achieved with our tooling that carries a 16 Grit rating.
For coating applications from 4 to 5 mil thickness, the surface profile should be a CSP 3.

Want To Learn More About Concrete Profiling?

Get In Touch